DTM-6
Network Stereo Receiver
En
Instruction Manual
SN29403237B_DTM-6_En_1802XX.book 1 ページ ２０１８年２月２８日 水曜日 午後４時５４分
2
Before Start
Table of Contents
Before Start
What's in the box .....................................................3
Part Names
Part Names .............................................................4
Install
Step1: Connect the Speakers .................................9
Step2: Connect an external device .......................10
Step3: Multi-zone Connection ...............................12
Step4: Connect Other Cables ............................... 13
Initial Setup
Initial Setup with Auto Start-up Wizard .................. 14
Entering text ..........................................................16
Playback
Playing audio from a connected device ................ 17
BLUETOOTH
®
Playback ......................................17
Internet Radio ....................................................... 18
Spotify ................................................................... 19
AirPlay
®
.................................................................20
USB Storage Device .............................................21
Listening to the AM/FM Radio ...............................23
Registering a station .............................................25
Music Server .........................................................26
Multi-zone ............................................................. 28
AUDIO Menu ......................................................... 30
Supplementary information
Supplementary Information for Player Functions ..31
Advanced Setup
Setup Menu ...........................................................32
Web Setup ............................................................40
Firmware Update ..................................................41
Others
Troubleshooting ....................................................43
General Specifications ..........................................47
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237B_DTM-6_En_1802XX.book 2 ページ ２０１８年２月２８日 水曜日 午後４時５４分
3
En
What's in the box
1. Main unit (1)
2. Remote controller (RC-906S) (1), batteries (AAA/R03)
(2)
3. (North American Models) power cord (1)
(European Models) power cord (2)
4. FM indoor antenna (1)
5. AM indoor antenna (1)
≥ Instruction Manual (This document)
0 Connect speakers with 4 ≠ to 16 ≠ impedance. Note that
when connecting to both SPEAKERS A and B terminals,
connect speakers with 8 ≠ to 16 ≠ impedance to both A
and B.
0 The power cord must be connected only after all other
cable connections are completed.
0 We will not accept responsibility for damage arising from
the connection of equipment manufactured by other
companies.
0 Functionality may be introduced by firmware updates
and service providers may cease services, meaning that
some network services and content may become
unavailable in the future. Furthermore, available services
may vary depending on your area of residence.
0 Details on the firmware update will be posted on our
website, etc.
0 Specifications and appearance are subject to change
without prior notice.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
1
32
54
SN29403237B_DTM-6_En_1802XX.book 3 ページ ２０１８年２月２８日 水曜日 午後４時５４分
4
Par t Na mes
Part Names
Front Panel
1. Í On/Standby button
2. Speaker A/Speaker B buttons: Used to switch between outputting and turning off output
from speakers connected to the SPEAKERS A or B terminal.
3. Remote control sensor: Receives signals from the remote controller.
0 The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on
the perpendicular axis and 30° to either side.
4. Hybrid Standby indicator: Lights if the unit enters standby mode when the features such
as NET Stby are enabled that continue to work when this unit is in standby.
5. Display button: Switches the information on the display. You can display information such
as the input source, volume, and input format when pressed repeatedly during play.
6. Display (P5)
7. Setup button: You can show advanced setting items on the display to provide you with an
even better experience (P32).
8. Cursors (D / C / B / A), Enter button: Select the item with the cursors and press Enter
to confirm. Use them to tune to stations when using TUNER (P23).
9. Return button: Returns the display to the previous state during setting.
10.
Master Volume
11.
Phones jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm diameter).
12.
Dimmer button (North American Models): You can adjust the brightness of the display in
three steps. It cannot be turned off completely.
RT/PTY button (European Models): Used when receiving stations transmitting text
information (P24).
13.
Zone 2 button: Controls the multi-zone function (P28).
14.
Off button: Switches the multi-zone function off (P29).
> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237B_DTM-6_En_1802XX.book 4 ページ ２０１８年２月２８日 水曜日 午後４時５４分
5
> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
En
15.
Input dial: Switches the input to be played. Turn the
control to switch the source in the following order;
BD/DVD#CBL/SAT#PC#GAME#TV/TAPE#
CD#PHONO#AM#FM#NET#BLUETOOTH.
16.
Bass dial: Adjusts the bass.
17.
Treble dial: Adjusts the treble.
18.
Balance dial: Adjusts the balance of the sounds output
from the left and right speakers.
19.
Memory button: Used to register AM/FM radio stations
(P25).
Menu button: Used to display the menu.
20.
Tuning Mode button:
Switches tuning to an AM/FM station between
automatic tuning and manual tuning (P23).
Play/Pause button: Used for play operations when
playing Music Server or USB.
21.
Preset 2 1 buttons: Used to select AM/FM radio
stations.
Skip (:/9) buttons: Used for play operations
when playing Music Server or USB.
22.
USB jack: A USB storage device is connected so that
music files stored in it can be played. You can also
supply power (maximum 5 V/0.5 A) to USB devices
with a USB cable.
0 When connecting a HDD that requires more than
5 V/0.5 A, connect to the USB port (maximum 5 V/
1 A) on the rear of the unit.
Display
1. The currently selected speaker system lights.
2. Lights in the following conditions.
Ë: When headphones are connected
Z2: ZONE 2 is on.
: When connected via BLUETOOTH
: When connected by Wi-Fi
NET: When "NET" is selected with the input selector and the unit is
connected to the network. It will flash if the connection to the network is
not correct.
USB: When "NET" is selected with the input selector and the unit is
connected by USB and the USB device is selected. Flashes if the USB
is not properly connected.
DIGITAL: Digital signals are input and the digital input selector is
selected.
3. Lights according to the type of input digital audio signals.
4. Lights in the following conditions.
RDS (European Models): Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio.
FM ST: Receiving FM stereo.
SLEEP: Sleep timer has been set.
AUTO STBY: Auto Stby (P33) has been set.
5. Flashes when muting is on.
6. Speaker/Channel display: Displays the output channel of the speakers.
7. This may light when performing operations with the "NET" input
selector.
8. Displays various information of the input signals.
SN29403237B_DTM-6_En_1802XX.book 5 ページ ２０１８年２月２８日 水曜日 午後４時５４分
6
Rear Panel
1. DIGITAL IN OPTICAL/COAXIAL jacks: Input digital audio signals from an external device
with a digital optical cable or digital coaxial cable.
2. REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and
synchronized with this unit (P11).
3. USB jack: A USB storage device is connected so that music files stored in it can be
played. You can also supply power (maximum 5 V/1 A) to USB devices with a USB cable.
4. ETHERNET jack: Connect to the network with an Ethernet cable.
5. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH wireless
technology enabled device. Adjust their angles according to the connection status.
6. IR IN/OUT jacks: Connected to the multi-room remote control kit. (*)
7. 12V TRIGGER OUT A/B/C jacks: Allows you to connect a device with 12V trigger input
jack to enable link operation between the device and the unit (P36, 37, 39). (*)
8. RS232 port: For connection to the home control system. (*)
(*)Special devices or cable connections are necessary to use the control functions 6 to 8.
Contact the specialized stores for more information.
9. AC INLET: Connect the supplied power cord.
10.
GND terminal: The ground wire of the turntable is connected.
11.
FM 75 /AM ANTENNA terminals: Connect the supplied FM indoor antenna and AM
indoor antenna.
12.
LINE IN jacks: Input audio signals from an external device with an analog audio cable.
13.
LINE OUT jacks: Connect a recording device, such as a cassette tape deck. Connect to
the LINE IN jacks on the recording device using analog audio cable.
14.
PRE OUT jacks: Connect a power amplifier.
15.
SUBWOOFER jack: Connect a subwoofer with built-in amplifier to amplify bass output.
> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
180°
90°
SN29403237B_DTM-6_En_1802XX.book 6 ページ ２０１８年２月２８日 水曜日 午後４時５４分
7
En
16.
ZONE 2 PRE OUT L/R/SUBWOOFER jacks: Audio output jack connected to a pre-main
amplifier, a power amplifier or a subwoofer with built-in amplifier for multi-zone playback
in a separate room.
17.
SPEAKERS terminals: Connect speakers with speaker cables. You can connect a set of
left and right speakers to each of the A/B terminals. (North American models are banana
plug ready.)
> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237B_DTM-6_En_1802XX.book 7 ページ ２０１８年２月２８日 水曜日 午後４時５４分
8
Remote Controller
1. Í On/Standby button
2. Input Selector buttons: Switches the input to be played.
3. Play buttons: Used to control play of a Music Server or device connected via USB, or of
RI connected devices.
0 The , , and buttons can only be used when playing RI connected devices.
4. Repeat button: Used for repeat play operations when playing Music Server or USB. Each
time you press the button, the mode switches from (1-track repeat) to (folder
repeat).
5. Speaker A/B button: Select the terminals to output audio from between SPEAKERS A/B.
6. Cursors (Up/Down/Left/Right), Enter button: Select the item with the cursors and press
Enter to confirm.
7. Setup button: You can show advanced setting items on the display to provide you with an
even better experience (P32).
8. CH (i/j) buttons: Used to select AM/FM radio stations.
9. Numbered buttons
10.
Display button: Switches the information on the display. You can display information such
as the input source, volume, and input format when pressed repeatedly during play.
11.
Dimmer button: You can adjust the brightness of the display in three steps. It cannot be
turned off completely.
12.
Remote Mode Main/Zone2 buttons: Controls the multi-zone function (P28).
13.
Random button: Used for random play operations when playing Music Server or USB.
Random turns on or off each time you press the button .
14.
Menu button: Used to display the menu.
15.
Return button: Returns the display to the previous state during setting.
16.
Audio button: Use for setting "Bass", "Treble", etc. (P30).
17.
Volume button
18.
Muting button: Temporarily mutes audio. Press again to cancel muting.
19.
CLR button: Deletes all characters you have entered when entering text (P16).
20.
Sleep button: Set the sleep timer. Press the button repeatedly to select the time. When
the time set (30, 60, or 90 minutes) has elapsed, the unit switches to standby. If Sleep
button is pressed after setting, the time remaining until sleep is displayed.
> Before Start >Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
When the remote controller isn't working: The
remote controller may have switched to the mode
for controlling ZONE 2. Press Remote Mode Main
to switch to the mode to control the main room.
Tips
SN29403237B_DTM-6_En_1802XX.book 8 ページ ２０１８年２月２８日 水曜日 午後４時５４分
9
En
Inst all
Step1: Connect the Speakers
You can connect two systems, Speaker A and Speaker B,
as the Speaker System. When connecting only one set,
connect to the SPEAKERS A terminals. With one set, use
speakers with 4 ≠ to 16 ≠ impedance. Note that when
connecting to both SPEAKERS A and B terminals, connect
speakers with 8 ≠ to 16 ≠ impedance to both A and B.
Connect the speaker cable so the wires do not protrude
from the speaker jacks. If the exposed wires of the
speakers touch the rear panel or the + and - wires touch
each other, the protection circuit will be activated.
(*)You can also connect a subwoofer with a built-in
amplifier to the SUBWOOFER PRE OUT jack to boost
bass playback even more. Use a subwoofer cable for
connection. When only Speaker B is outputting audio,
there will be no audio output from the powered
subwoofer.
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
a
a
Speaker B
Speaker A
1/2˝
(12 mm)
*
Left
Right
Left
Right
a Speaker Cable
Setup
0 When connected as a Speaker B System, you
can output the same audio as Speaker A System
by switching with A/B/A+B. Press Speaker A/B on
the remote control to switch. The selection
changes in the order SPEAKER A, SPEAKER B,
SPEAKER A+B with each press.
0 If any of the connected speakers have an
impedance of 4 ≠ or more to less than 6 ≠, or
when speaker systems are connected to both of
the SPEAKERS A/B terminal, after completing
Initial Setup, you need to make some settings in
the Setup menu. Press Setup on the remote
controller, and set "3. Hardware" - "SpImpedance"
to "4 ". (P33)
SN29403237B_DTM-6_En_1802XX.book 9 ページ ２０１８年２月２８日 水曜日 午後４時５４分
10
Step2: Connect an external device
1. DIGITAL IN connection
Connect an external device with a digital optical cable or
digital coaxial cable. Note that this unit is equipped with an
"Opt1Wkup feature" so that when play starts on an external
device connected to the OPTICAL 1 (GAME) terminal, this
unit comes on and the INPUT SELECTOR automatically
changes.
0 The default setting for "Opt1Wkup feature" is "Off". To
enable this function, please press Setup on the remote
controller, and set "3. Hardware" - "Opt1Wkup". (P34)
0 The Opt1Wkup feature does not work when the unit is in
the mode for controlling ZONE 2 (P28).
0 Only PCM audio is supported for input through the
DIGITAL IN OPTICAL/COAXIAL jacks. Set the audio
output on the external device to output PCM.
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
GAME
b
a
BD/DVD
a Digital Optical Cable, b Digital Coaxial Cable
SN29403237B_DTM-6_En_1802XX.book 10 ページ ２０１８年２月２８日 水曜日 午後４時５４分
11
En
2. LINE IN connection
Connect an external device with an analog audio cable. You
can connect a turntable that has an MM-type cartridge to
the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
an LINE IN jack other than the PHONO jack. Also, if the
turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any LINE IN
jack other than the PHONO jack.
If the turntable has a ground wire,
connect it to the GND terminal.
0
By connecting an Onkyo component with RI jack to the unit
by using an RI cable and an analog audio cable, you can
link the unit’s power and input selection and enable
operation with this unit’s remote controller. For details, refer
to the instruction manual of the component with the RI jack.
0 Part of the function may not operate even if it is
connected via RI depending on the equipment.
0 The RI linking features may not work when the unit is
in the mode for controlling ZONE 2 (P28).
0 When connecting an RI dock, you must rename the
input selectors on the unit to make the system link
work. Select the GAME input selector to display
"GAME" on the main unit display. Then press and hold
Return on the main unit for 3 seconds to switch the
display to "DOCK".
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
CD
a
Turntable
a Analog Audio Cable
SN29403237B_DTM-6_En_1802XX.book 11 ページ ２０１８年２月２８日 水曜日 午後４時５４分
12
Step3: Multi-zone Connection
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the separate
room (ZONE 2).
0 DSD format files cannot be output to ZONE 2.
ZONE 2 PRE OUT
Connect the ZONE 2 PRE OUT L/R jacks of the unit and
the LINE IN jacks of the pre-main amplifier in a separate
room with an analog audio cable.
(*)You can also connect a subwoofer with built-in amplifier
to the ZONE 2 PRE OUT SUBWOOFER jack.
0 Settings are required in the Setup menu to adjust the
volume and sound quality on a power amplifier in another
room. Press Setup on the remote controller, and set "5.
Zone2" - "Z2Out" to "Variable". Otherwise, high-volume
sound may cause damage to the power amplifier or
speakers.
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
LINE
IN
ZONE2 PRE OUT
ZONE2
MAIN ROOM
a
*
a Analog Audio Cable
SN29403237B_DTM-6_En_1802XX.book 12 ページ ２０１８年２月２８日 水曜日 午後４時５４分
13
En
Step4: Connect Other Cables
1. Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy Network Functions such as
internet radio by connecting to the network. If you connect
by wired LAN, connect to the router with an Ethernet cable
to the ETHERNET port as shown in the illustration. To
connect by Wi-Fi, after selecting "Wi-Fi" in Initial Setup
(P14), select the desired setting method to configure the
connection.
2. AM, FM Antenna Hookup
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the FM Indoor antenna to a wall.
FM Indoor antenna
3. Power Cord Hookup
This model includes a removable power cord. The power
cord must be connected only after all other connections are
completed. Make sure you first connect the power cord to
AC INLET of the unit and then connect to the outlet. Always
disconnect the outlet side first when disconnecting the
power cord.
> Before Start > Part Names >Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
bb
a
c
FM
AM
d
(North American
Models)
(European Models)
a AM indoor antenna,
b FM indoor antenna,
c Ethernet Cable, d Power cord
SN29403237B_DTM-6_En_1802XX.book 13 ページ ２０１８年２月２８日 水曜日 午後４時５４分
14
Initial Setup
Initial Setup with Auto Start-up Wizard
Starting up: When you press Í, "Now Initializing..." is
displayed on the display. After this, when "Now
Initializing..." goes out, you can start operating the unit.
Wi-Fi connection settings
When you first turn the power on, the Network Setup
display is displayed automatically, allowing you to easily
make Wi-Fi connection settings.
To set, select the item with the cursors on the remote
controller and press Enter to confirm.
0 To return to the previous display, press Return.
1. Press Enter when "Network Setup" is displayed.
2. To make Wi-Fi settings, select "Wi-Fi". If you have
connected with an ethernet cable, select "Wired(Exit)"
with Up/Down on the remote controller and press Enter.
3. If you selected "Wi-Fi", select the setting method with Up/
Down on the remote controller and press Enter.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Network Setup
1 2
Network Setup
Wi-Fi
Wired ( Exit )
SN29403237B_DTM-6_En_1802XX.book 14 ページ ２０１８年２月２８日 水曜日 午後４時５４分
15
En
0 To redo the initial settings, press Setup on the remote
controller, and set "6. Network" - "Wi-Fi" to "On". Select
"Wi-Fi Setup" after this.
∫ Scan Networks
From the list of SSID for access points such as wireless
LAN routers, select the required SSID and make the
settings.
1. Select the SSID of the access point you want to connect
with Up/Down on the remote controller and press Enter.
2. Select "Enter Password" or "Push Button" with Up/Down
on the remote controller and press Enter. If the access
point has an automatic connection button, by selecting
"Push Button" you can connect without entering a
password.
3. If you select "Enter Password", enter the password of the
access point. For details on how to enter text, refer to
"Entering text" (P16).
If you select "Push Button", then after pressing and
holding the automatic setting button on the access point
for the required amount of time, press Enter on the
remote controller.
4. After "Now Connecting" is displayed, the information of
the display switches when the Wi-Fi settings are
complete.
0 If "Retry" appears on the display, press Enter to retry
the settings.
When the access point is not displayed
Press the Right button on the remote controller to select
"Other...", then press Enter. Set by entering the SSID of the
access point you want to connect.
1. Enter the SSID. For details on how to enter text, refer to
"Entering text" (P16).
2. Select the authentication method with Up/Down on the
remote controller and press Enter.
0 If you select "None", proceed to step 3. If you select
"WEP", "WPA", or "WPA2", enter the password and
confirm.
3. After "Now Connecting" is displayed, the information of
the display switches when the Wi-Fi settings are
complete.
0 If "Retry" appears on the display, press Enter to retry
the settings.
∫ Use iOS device
Set by sharing the iOS device's Wi-Fi settings with this unit.
This unit supports iOS device versions iOS7 and later.
1. Connect the iOS device by Wi-Fi.
2. Select this device in the "SET UP NEW AIRPLAY
SPEAKER..." item on the screen of the iOS device and
select "Next".
0 This unit is displayed as "Integra DTM-6 XXXXXX".
3. After "Now Connecting" is displayed on this unit, when
the Wi-Fi settings are complete, the display changes.
Select "Done" on the screen of the iOS device.
Scan Networks
Use iOS Device
My SSID
Enter Password
Push Button
Security : WPA2
Security : WPA
Security : WEP
Security : None
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237B_DTM-6_En_1802XX.book 15 ページ ２０１８年２月２８日 水曜日 午後４時５４分
16
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Entering text
Text entry, for passwords, etc., uses the
following procedure.
1. Select the characters or symbols with
Up/Down/Left/Right (a).
2. Press Enter (a) to confirm the selected
character. Repeat this to enter text.
0 Press Caps (b) to change the
characters to be enter, for example to
switch between upper and lower case.
0 Press CLR (c) to delete all the input
characters.
3. After completing input, select "OK" with
Up/Down/Left/Right (a) and press Enter
(a).
Characters that can be entered
Space: A single space the size of a
character is entered.
A/a: Switches between characters
displayed. (a A)
(left) / (right) : Select to move the
c
b
a
abcdefghijklm
A
/
a B
S
O
K
á
Á
cursor.
BS (backspace): Removes a character on
the left of the cursor. The cursor moves left.
OK: Confirms the entered content.
SN29403237B_DTM-6_En_1802XX.book 16 ページ ２０１８年２月２８日 水曜日 午後４時５４分
17
En
Playback
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Playing audio from a connected device
Basic Operations
You can play the audio from external
devices such as Blu-ray Disc players
through this unit.
Perform the following procedure when the
unit is on.
1. Press the input selector (a) on the
remote controller with the same name as
the jack to which you connected the
player to switch the input.
For example, press the BD/DVD button
to play the player connected to the BD/
DVD jack. Press TV/Tape to listen the
TV's sound.
2. Start play on the connected player.
21
a
BLUETOOTH
®
Playback
You can wirelessly play music on a
smartphone or other BLUETOOTH
wireless technology enabled device.
Perform the following procedure when the
unit is on.
Pairing
1. When you press the Bluetooth button,
"Now Pairing..." is displayed on this
unit's display, and the pairing mode is
enabled.
2. Enable (turn on) the BLUETOOTH
function of the BLUETOOTH wireless
technology enabled device, then select
this unit from amongst the devices
displayed. If a password is requested,
enter "0000".
0 This unit is displayed as "Integra
DTM-6 XXXXXX".
0 To connect another BLUETOOTH
wireless technology enabled device,
press and hold Bluetooth until "Now
Pairing..." is displayed, then perform
step 2. This unit can store the data of
up to eight paired devices.
0 The coverage area is 48y/15 meters.
Note that connection is not always
guaranteed with all BLUETOOTH
wireless technology enabled devices.
Playing Back
1. Perform the connection procedure on
the BLUETOOTH wireless technology
enabled device.
The input on this unit automatically
switches to "BLUETOOTH".
2. Play the music files. Increase the volume
of the BLUETOOTH wireless technology
enabled device to an appropriate level.
0 Due to the characteristics of
BLUETOOTH wireless technology, the
sound produced on this unit may slightly
be behind the sound played on the
BLUETOOTH wireless technology
enabled device.
1 2 3
Now Pairing . . .
SN29403237B_DTM-6_En_1802XX.book 17 ページ ２０１８年２月２８日 水曜日 午後４時５４分
18
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Internet Radio
You can use internet radio services such as
TuneIn Radio, Pandora, Deezer, and
TIDAL by connecting this unit to a network
that has an internet connection.
0 The network needs to be connected to
the internet in order to play internet radio
services.
0 Depending on the internet radio service,
the user may need to register from their
computer first. Refer to the websites for
each of the services for details about
them.
0 Functionality may be introduced by
firmware updates and service providers
may cease services, meaning that some
network services and content may
become unavailable in the future.
Playing Back
Perform the following procedure when the
unit is on.
1. Press NET (a) on the remote controller.
2. With the Up/Down cursors (b) on the
remote controller, select "TuneIn Radio",
for example, and then press Enter (b).
3. Use the Up/Down cursors (b) on the
remote controller to select radio stations
and programs, then press Enter to play
(b).
0 To return to the previous display, press
Return (c).
TuneIn Radio
2
1
PandoraDeezer
Pandora
Pandora
TuneIn Radio
Deezer
TIDAL
Internet Radio Service Menus
You can register certain stations as your
favorites or delete stations you have
registered from your favorites. The menu
displayed depends on the service currently
selected.
A menu is displayed on the display when
you press Menu on the remote controller
while playing a radio station.
To operate, press Up/Down on the remote
controller to select the menu and press
Enter to confirm your selection.
Regarding the TuneIn Radio
Account
Creating an account on the TuneIn Radio
website (tunein.com) and logging in from
the unit allows you to automatically add
your favorite radio stations and programs
to your "My Presets" on the unit as you
follow them on the website. "My Presets"
are displayed in the level under TuneIn
Radio.
To display a radio station registered in "My
Presets", you must log into TuneIn Radio
from the unit. To log in, select "Login" - "I
have a TuneIn account" in the "TuneIn
Radio" top list on the unit, and then enter
your user name and password.
0 If you select "Login" on this unit, you can
use the displayed registration code to
associate this device on the My Page
section of the TuneIn Radio website so
that you can login to "Login" - "Login with
a registration code" without having to
enter your user name and password.
b
c
a
SN29403237B_DTM-6_En_1802XX.book 18 ページ ２０１８年２月２８日 水曜日 午後４時５４分
19
En
Spotify
Spotify Connect play is possible by
connecting this unit to the same network as
a smart phone or tablet.
0 To play Spotify Connect, you need to
install the Spotify application on your
smartphone or tablet. You also need to
create a Spotify premium account.
– Refer to the following for Spotify
settings:
www.spotify.com/connect/
Playing Back
1. Connect the smartphone to the access
point that this unit is connected to.
2. Start the Spotify app.
3. Play the track in the Spotify app, then
after switching to the screen for
controlling play, tap "Devices Available"
at the bottom of the screen.
4. Select this unit.
5. This unit turns on automatically and the
input selector changes to NET and
streaming of Spotify starts.
0 If "3. Hardware" - "NET Stby" is set to
"Off" in the Setup menu, manually turn
the unit on and then press NET on the
remote controller.
Notes for using multi-zone
0 To enjoy Spotify in a separate room,
manually select "NET" as the input of the
separate room. After doing that, select
this unit with the Spotify app.
0 To enjoy Spotify in the main room after
playing Spotify in a separate room,
select "NET" as the input of the main
room.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
1 22 43
SN29403237B_DTM-6_En_1802XX.book 19 ページ ２０１８年２月２８日 水曜日 午後４時５４分
20
AirPlay
®
Basic Operations
You can wirelessly enjoy the music files on
an iPhone
®
, iPod touch
®
, or iPad
®
connected to the same access point as this
unit.
0 Update the OS version on your iOS
device to the latest version.
0 There may be some differences in the
operations screens and how operations
are performed on the iOS device
depending on the iOS version. For
details, see the operating instructions for
the iOS device.
1. Connect the iOS device to the access
point.
2. Press NET.
3. Tap the AirPlay icon in the play
screen of the music app on the iOS
device and select this unit from the list of
devices displayed.
4. Play the music files on the iOS device.
0 The default status is for the NET Stby
feature to be on, so when you do steps 3
and 4 above, this unit automatically
comes on and input switches to "NET".
To reduce the amount of power
consumed in standby mode, press the
Setup button on the remote controller,
then in the Setup menu displayed set "3.
Hardware" -"NET Stby" to "Off".
0 Due to the characteristics of AirPlay
wireless technology, the sound produced
on this unit may slightly be behind the
sound played on the AirPlay-enabled
device.
You can also play the music files on a
computer with iTunes (Ver. 10.2 or later).
Before operation, make sure this unit and
the PC are connected to the same network,
then press NET on this unit. Next, click the
AirPlay icon in iTunes, select this unit
from the list of devices displayed, and start
play of a music file.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
1 22 243
e.g., iOS 10
SN29403237B_DTM-6_En_1802XX.book 20 ページ ２０１８年２月２８日 水曜日 午後４時５４分
21
En
USB Storage Device
Basic Operations
You can play music files stored on a USB
storage device.
Perform the following procedure when the
unit is on.
1. Plug your USB storage device with the
music files into the USB port either on
the front panel or rear panel of this unit.
2. Press NET (a) on the remote controller.
3. Press the Up/Down cursors (b) on the
remote controller, select "USB Front" or
"USB Rear" on the display, and then
press Enter (b).
0 If the "USB" indicator flashes on the
display, check whether the USB
storage device is plugged in properly.
0 Do not unplug the USB storage
device while "Connecting..." is on the
display. This may cause data
corruption or malfunction.
4. Press Enter (b) on the remote controller
after reading is complete.
5. Press the Up/Down cursors (b) on the
remote controller to select the folder and
music file, and then press Enter (b) to
start playback.
0 To return to the previous display, press
Return (c).
0 The USB port of this unit conforms with
the USB 2.0 standard. The transfer
speed may be insufficient for some
content you play, which may cause
some interruption in sound.
Supported Audio Formats
This unit supports the following music file
formats. Note that sound files that are
protected by copyright cannot be played on
this unit.
MP3 (.mp3/.MP3):
0 Supported formats: MPEG-1/MPEG-2
Audio Layer 3
0 Supported sampling rates: 44.1 kHz, 48
kHz
0 Supported bitrates: Between 8 kbps and
320 kbps and VBR
WMA (.wma/.WMA):
0 Supported sampling rates: 44.1 kHz and
48 kHz
0 Supported bitrates: Between 5 kbps and
320 kbps and VBR
0 WMA Pro/Voice/WMA Lossless formats
are not supported
WAV (.wav/.WAV):
WAV files include uncompressed PCM
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
USB Front
42 31
b
c
a
SN29403237B_DTM-6_En_1802XX.book 21 ページ ２０１８年２月２８日 水曜日 午後４時５４分
22
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
digital audio.
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
AIFF (.aiff/.aif/.AIFF/.AIF):
AIFF files include uncompressed PCM
digital audio.
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/
.M4A/.MP4/.3GP/.3G2):
0 Supported formats: MPEG-2/MPEG-4
Audio
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz
0 Supported bitrates: Between 8 kbps and
320 kbps and VBR
FLAC (.flac/.FLAC):
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
Apple Lossless (.m4a/.mp4/.M4A/.MP4):
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 16 bit, 24 bit
DSD (.dsf/.dff/.DSF/.DFF):
0 Supported formats: DSF/DSDIFF
0 Supported sampling rates: 2.8 MHz and
5.6 MHz
0 Variable bit-rate (VBR) files are
supported. However, playback times
may not be displayed correctly.
0 This unit supports the gapless playback
of the USB storage device in the
following conditions.
When playing WAV, FLAC and Apple
Lossless, and the same format,
sampling frequency, channels and
quantization bit rate are played
continuously
Device Requirements
0 Note that operation is not guaranteed
with all USB storage devices.
0 This unit can use USB storage devices
that comply with the USB mass storage
device class standard. The unit is also
compatible with USB storage devices
using the FAT16 or FAT32 file system
formats.
0 If the USB storage device has been
partitioned, each section will be treated
as an independent device.
0 Up to 20,000 tracks per folder can be
displayed, and folders may be nested up
to 16 levels deep.
0 USB hubs and USB storage devices with
hub functions are not supported. Do not
connect these devices to the unit.
0 USB storage devices with security
function are not supported on this unit.
0 If you connect a USB hard disk drive to
the USB port of the unit, we recommend
that you use its AC adapter to power it.
0 Media inserted to the USB card reader
may not be available in this function.
Furthermore, depending on the USB
storage device, proper reading of the
contents may not be possible.
0 We accept no responsibility whatsoever
for the loss or damage to data stored on
a USB storage device when that device
is used with this unit. We recommend
that you back up your important music
files beforehand.
SN29403237B_DTM-6_En_1802XX.book 22 ページ ２０１８年２月２８日 水曜日 午後４時５４分
23
En
Listening to the AM/FM Radio
You can receive AM/FM radio stations on
this unit with the built-in tuner. Perform the
following procedure when the unit is on.
∫ Tuning into a Radio Station
Tuning Automatically
1. Repeatedly press Tuner (a) on the
remote controller and select "AM" or
"FM".
2. Press Tuning Mode on the main unit so
that "TunMode : Auto" appears on the
display.
3. When you press the cursor Up/Down
buttons (b) on the remote controller,
automatic tuning starts, and searching
stops when a station is found. When
tuned into a radio station, the "TUNED"
indicator on the display lights. When
tuned into a stereo FM radio station, the
"FM ST" indicator lights.
When FM broadcasts reception is poor:
Perform the procedure for "Tuning
Manually" in the following section. Note
that if you tune manually, the reception for
FM broadcasts will be monaural rather than
stereo, irrespective of the sensitivity of the
reception.
Tuning Manually
If you tune manually, the reception for FM
broadcasts will be monaural rather than
stereo, irrespective of the sensitivity of the
reception.
1. Repeatedly press Tuner (a) on the
remote controller and select "AM" or
"FM".
2. Press Tuning Mode on the main unit so
that "TunMode : Manual" appears on the
display.
3. While pressing the cursor Up/Down
buttons (b) on the remote controller,
select the desired radio station.
0 The frequency changes by 1 step
each time you press Up/Down
buttons. The frequency changes
continuously if the button is held down
and stops when the button is
released.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
1 2 3
TunMode : Auto
TunMode : Manual
a
b
SN29403237B_DTM-6_En_1802XX.book 23 ページ ２０１８年２月２８日 水曜日 午後４時５４分
24
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Tuning into Stations by Frequency
It allows you to directly enter the frequency
of the radio station you want to listen to.
1. Press the Tuner button (a) of the remote
controller repeatedly to select either
"AM" or "FM".
2. Press D.TUN button (c) on the remote
controller.
3. Using the number buttons (b) on the
remote controller, enter the frequency of
the radio station within 8 seconds.
0 To enter 87.5 (FM), for example,
press 8, 7, 5 or 8, 7, 5, 0. If the
entered number is incorrect, press the
D.TUN button again and re-enter the
number.
Frequency step setting:
Press Setup on the remote controller, then
use the cursor buttons and Enter on the
remote controller to select "3. Hardware" -
"AM/FM" (North American Models)/"AM
Freq" (European Models), and select the
frequency step for your region. Note that
when this setting is changed, all radio
presets are deleted.
∫ Using RDS (European
Models)
RDS stands for Radio Data System and is
a method of transmitting data in FM radio
signals. In regions using RDS, the radio
station name is displayed when you tune
into a radio station broadcasting program
information. Further, when you press RT/
PTY on the main unit in this state, you can
use the following functions.
Displaying Text Information (Radio
Text)
1. While the name of the station is being
displayed on the display, press RT/PTY
on the main unit once.
Text information broadcast by the station
(Radio Text) is displayed scrolling across
the display. "No Text Data" is displayed
when no text information is available.
Search for Stations by Program
Type
1. While the name of the station is being
displayed on the display, press RT/PTY
on the main unit twice.
2. Press the cursors Left/Right on the
remote controller to select the Program
Type you want to find, then press Enter
to start the search.
0 The Program Types displayed are as
follows: None / News (News reports) /
Affairs (Current affairs) / Info
(Information) / Sport / Educate
(Education) / Drama / Culture /
Science (Science and technology) /
Varied / Pop M (Pop music) / Rock M
(Rock music) / Easy M (Middle of the
road music) / Light M (Light classics) /
Classics (Serious classics) / Other M
(Other music) / Weather / Finance /
Children (Children’s programmes) /
Social (Social affairs) / Religion /
Phone In / Travel / Leisure / Jazz
(Jazz music) / Country (Country
music) / Nation M (National music) /
Oldies (Oldies music) / Folk M (Folk
music) / Document (Documentary)
0 The information displayed may
sometimes not match the content
being broadcast by the station.
3. When a station is found, the station
flashes on the display. Press Enter while
this is happening to start receiving that
station. If you don't press Enter, the unit
continues to search for another station.
0 If no stations are found, the message
"Not Found" is displayed.
0 Unusual characters may be displayed
when the unit receives unsupported
characters. However, this is not a
malfunction. Also, if the signal from a
station is weak, information may not be
displayed.
c
a
b
SN29403237B_DTM-6_En_1802XX.book 24 ページ ２０１８年２月２８日 水曜日 午後４時５４分
25
En
Registering a station
You can register up to 40 of your favorite
radio stations.
Registering
After tuning into the radio station you want
to register, perform the following
procedure.
1. Press Memory on the main unit so that
the preset number on the display
flashes.
2. While the preset number is flashing
(about 8 seconds), repeatedly press the
cursor Left/Right buttons (b) on the
remote controller to select a number
between 1 and 40.
3. Press Memory again on the main unit to
register the station.
When the station is registered, the
preset number stops flashing. Repeat
this procedure for all of your favorite
radio stations.
Selecting a Preset Radio Station
1. Press Tuner (a) on the remote controller.
2. Press the cursor Left/Right buttons (b)
on the remote controller to select a
preset number.
0 You can also use the CH (i/j)
buttons.
Deleting a Preset Radio Station
1. Press Tuner (a) on the remote controller.
2. Press the cursor Left/Right buttons (b)
on the remote controller to select the
preset number to delete.
3. While pressing Memory on the main unit,
press Tuning Mode to delete the preset
number. When deleted, the number on
the display goes off.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
1 2 3
FM 87.5 MHz 1
a
b
SN29403237B_DTM-6_En_1802XX.book 25 ページ ２０１８年２月２８日 水曜日 午後４時５４分
26
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Music Server
It is possible to stream music files stored
on PCs or NAS devices connected to the
same network as this unit.
0 The network servers compatible with the
Music Server feature are those PCs with
players installed that have the server
functionality of Windows Media
®
Player
11 or 12, or NAS that are compatible
with home network functionality. Note
that with PCs, only music files registered
in the library of Windows Media
®
Player
can be played.
0 You may need to make some settings on
the PC in advance to use Windows
Media
®
Player 11 or 12 with the Music
Server feature.
∫ Windows Media
®
Player
settings
On Windows Media
®
Player 11
1. Turn on your PC and start Windows
Media
®
Player 11.
2. In the "Library" menu, select "Media
Sharing" to display a dialog box.
3. Select the "Share my media" check box,
and then click "OK" to display the
compatible devices.
4. Select this unit, click "Allow" and put a
check mark next to the icon for this unit.
5. Click "OK" to close the dialog.
0 Depending of the version of Windows
Media
®
Player, there may be differences
in the names of items you can select.
On Windows Media
®
Player 12
1. Turn on your PC and start Windows
Media
®
Player 12.
2. In the "Stream" menu, select "Turn on
media streaming" to display a dialog
box.
Music Server
31 2
0 If media streaming is already turned on,
select "More streaming options..." in the
"Stream" menu to list players in the
network, and then go to step 4.
3. Click "Turn on media streaming" to list
players in the network.
4. Select this unit in "Media streaming
options" and check that it is set to
"Allow".
5. Click "OK" to close the dialog.
0 Depending of the version of Windows
Media
®
Player, there may be differences
in the names of items you can select.
∫ Playing Back
Before performing the operations below,
start the server (Windows Media
®
Player
11, Windows Media
®
Player 12, or NAS
device) containing the music files to play,
and make sure that the PCs and/or NASs
are properly connected to the same
network as this unit.
Perform the following procedure when the
unit is on.
1. Press NET (a) on the remote controller.
2. Select "Music Server" with the Up/Down
cursors (b) on the remote controller and
press Enter (b) to confirm your selection.
3. With the Up/Down cursors (b) on the
remote controller, select the server you
want and then press Enter (b).
4. With the Up/Down cursors (b) on the
remote controller, select the music file to
play, and then start playback with Enter
(b).
0 To return to the previous display, press
Return (c).
0 If "No Item." is displayed, check whether
the network is properly connected.
0 Depending on the server and share
settings, the unit may not recognize it, or
may not be able to play its music files.
Furthermore, the unit cannot access
pictures and videos stored on servers.
0 For music files on a server, there can be
up to 20,000 tracks per folder, and
folders may be nested up to 16 levels
deep.
b
c
a
SN29403237B_DTM-6_En_1802XX.book 26 ページ ２０１８年２月２８日 水曜日 午後４時５４分
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
27
En
∫ Controlling Remote Playback
from a PC
You can use this unit to play music files
stored on your PC by operating the PC
inside your home network. The unit
supports remote playback with Windows
Media
®
Player 12.
1. Turn on your PC and start Windows
Media
®
Player 12.
2. Open the "Stream" menu and check that
"Allow remote control of my Player..." is
checked. Click "Turn on media
streaming" to list players in the network.
3. Select and right-click the music file to
play with Windows Media
®
Player 12. To
remotely play a music file on another
server, open the target server from
"Other Libraries" and select the music
file to play.
4. Select this unit in "Play to" to open the
"Play to" window of Windows Media
®
Player 12 and start playback on the unit.
If your PC is running on Windows
®
8.1,
click "Play to", and then select this unit. If
your PC is running on Windows
®
10,
click "Cast to Device", and select this
unit. Operations during remote playback
are possible from the "Play to" window
on the PC.
5. Adjust the volume using the volume bar
on the "Play to" window.
0 Sometimes, the volume displayed on the
remote playback window may differ from
that appeared on the display of the unit.
Also, when the volume is adjusted from
this unit, this is not reflected in the "Play
to" window.
0 Remote playback is not possible when
using a network service or playing music
files on a USB storage device.
0 Depending of the version of Windows
®
,
there may be differences in the names of
items you can select.
Supported Audio Formats
This unit supports the following music file
formats. Remote play of FLAC and DSD is
not supported.
MP3 (.mp3/.MP3):
0 Supported formats: MPEG-1/MPEG-2
Audio Layer 3
0 Supported sampling rates: 44.1 kHz, 48
kHz
0 Supported bitrates: Between 8 kbps and
320 kbps and VBR
WMA (.wma/.WMA):
0 Supported sampling rates: 44.1 kHz, 48
kHz
0 Supported bitrates: Between 5 kbps and
320 kbps and VBR
0 WMA Pro/Voice/WMA Lossless formats
are not supported
WAV (.wav/.WAV):
WAV files include uncompressed PCM
digital audio.
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
AIFF (.aiff/.aif/.AIFF/.AIF):
AIFF files include uncompressed PCM
digital audio.
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/
.M4A/.MP4/.3GP/.3G2):
0 Supported formats: MPEG-2/MPEG-4
Audio
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz
0 Supported bitrates: Between 8 kbps and
320 kbps and VBR
FLAC (.flac/.FLAC):
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
LPCM (Linear PCM):
0 Supported sampling rates: 44.1 kHz and
48 kHz
0 Quantization bit: 16 bit
Apple Lossless (.m4a/.mp4/.M4A/.MP4):
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz
0 Quantization bit: 16 bit, 24 bit
DSD (.dsf/.dff/.DSF/.DFF):
0 Supported formats: DSF/DSDIFF
0 Supported sampling rates: 2.8 MHz, 5.6
MHz
0 Variable bit-rate (VBR) files are
supported. However, playback times
may not be displayed correctly.
0 Remote playback does not support the
gapless playback.
SN29403237B_DTM-6_En_1802XX.book 27 ページ ２０１８年２月２８日 水曜日 午後４時５４分
28
Multi-zone
Basic operations
You can enjoy audio in the separate room
by, for example, playing a Blu-ray Disc
player in the main room (where this unit is
located) and listening to internet radio in
the separate room (ZONE 2).
0 DSD format files cannot be output to
ZONE 2.
0 You can only select the same inputs for
the main room and separate room with
the "NET" or "BLUETOOTH" input
selector. If you have "NET" selected in
the main room and then select
"BLUETOOTH" in the separate room,
the main room also switches to
"BLUETOOTH". You cannot select
different stations for the main room and
separate room with the AM/FM radio.
0 If ZONE 2 is on, power consumption
during standby becomes larger than
normal. Furthermore, RI linking features
may not work.
A power amplifier in another room:
Settings are required in the Setup menu to
adjust the volume and sound quality on a
power amplifier in another room. Press
Setup on the remote controller, and set "5.
Zone2" - "Z2Out" to "Variable". Otherwise,
high-volume sound may cause damage to
the power amplifier or speakers.
Perform the following procedure when the
unit is on.
1. Press Remote Mode Zone2 (a) on the
remote controller.
0 The remote controller switches to the
mode for controlling ZONE 2.
2. Face the remote controller at this unit
and press Í (c).
The "Z2" indicator on the display lights.
3. Press the input selector (d) of the input
you want to play in the separate room.
0 On the main unit, after pressing
Zone2, within 8 seconds turn the Input
dial to select the input to be played in
the separate room. To play the same
source in the main room and separate
room, press Zone2 on the main unit
twice.
4. To adjust the volume on the power
amplifier in the other room, press Zone 2
on the main unit, then adjust with the
master volume dial within 8 seconds.
Alternatively, you can use the VOLUME
3/4 or Muting buttons on the remote
control after pressing the Remote Mode
Zone2 button.
0 Adjust the volume on the pre-main
amplifier if you have connected with a
pre-main amplifier in the other room.
0 You can also adjust the sound quality
of a power amplifier connected in a
separate room. After pressing Zone 2
on the main unit, within 8 seconds
turn the Bass dial, Treble dial, or
Balance dial to make the adjustments.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
3
21
To return the remote controller
to main room control mode:
Press Remote Mode Main (b) on
the remote controller.
d
c
b
a
SN29403237B_DTM-6_En_1802XX.book 28 ページ ２０１８年２月２８日 水曜日 午後４時５４分
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
29
En
To turn off the function:
Press the
Í
button while the remote
controller is in the mode for controlling ZONE
2. Alternatively press Off on the main unit.
Playing in ZONE 2 only:
If you turn the unit to standby during multi-
zone playback, the Z2 indicator is dimmed
and the playback mode is switched to
playback in a separate room only. Turning
ZONE 2 on while the unit is in standby also
switches the playback mode to playback in
a separate room only.
SN29403237B_DTM-6_En_1802XX.book 29 ページ ２０１８年２月２８日 水曜日 午後４時５４分
30
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
AUDIO Menu
By pressing Audio on the remote controller
during play, you can adjust frequently used
settings, such as the sound quality.
1. Press Audio (c) on the remote controller.
2. Select the item with the Up/Down
buttons (a) on the remote controller.
3. Select the setting value with the Left/
Right buttons (a) on the remote
controller.
0 To return to the previous display, press
Return (b).
∫ Direct
Enable or disable the Direct feature which
outputs pure sound as it was intended by
bypassing the tone control circuits during
play.
∫ Bass
Enhance or moderate the bass range of the
speakers.
Select between j10 dB and i10 dB in 1
dB increments. (default value: 0 dB)
0 It cannot be set if the Direct mode is
selected.
∫ Treble
Enhance or moderate the treble range of
the speakers.
Select between j10 dB and i10 dB in 1
dB increments. (default value: 0 dB)
0 It cannot be set if the Direct mode is
selected.
∫ Balance
Adjust the balance of the sounds output
from the left and right speakers.
Select between Li10 and Ri10 in 1 steps
increments. (default value: 0)
a
c
b
SN29403237B_DTM-6_En_1802XX.book 30 ページ ２０１８年２月２８日 水曜日 午後４時５４分
31
En
Supplementary information
Supplementary Information for Player Functions
Due to firmware (the software for the system) updates after
you make your purchase or firmware changes during
production of the product, there may be additions or
changes to the features available compared to what is in
the instruction manual.
For information about player functions that have been
added or changed or the operation of FireConnect, see the
following references.
http://integraworldwide.com/manual/sup/17intply01.pdf
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237B_DTM-6_En_1802XX.book 31 ページ ２０１８年２月２８日 水曜日 午後４時５４分
32
Advanced Setup
Setup Menu
The unit allows you to configure advanced settings to provide you with an even better
experience.
1. Press Setup (b) on the remote controller.
2. Select the item with the Up/Down buttons (a) on the remote controller and press Enter (a)
to confirm your selection.
3. Select the submenu with the Up/Down buttons (a) on the remote controller.
4. Select the setting value with the Left/Right buttons (a) on the remote controller and press
Enter (a) to confirm your selection.
0 To return to the previous display, press Return (c) .
5. To exit the settings, press Setup (b) .
1. DigitalAudio
You can change input assignment between the input selectors and DIGITAL IN COAXIAL/
OPTICAL jacks. If you do not assign a jack, select "---".
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
1
COAX1 "BD/DVD", "CBL/SAT", "GAME", "PC", "CD", "TV/TAPE",
"PHONO": Allocate an input selector to the DIGITAL IN
COAXIAL 1 jack. (Default Value is "BD/DVD")
1.DigitalAudio
a
b
c
SN29403237B_DTM-6_En_1802XX.book 32 ページ ２０１８年２月２８日 水曜日 午後４時５４分
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
33
En
0 Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz,
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, 24 bit, 176.4 kHz, 192 kHz/16 bit,
20 bit, 24 bit.
2. Main Volume
3. Hardware
COAX2 "BD/DVD", "CBL/SAT", "GAME", "PC", "CD", "TV/TAPE",
"PHONO": Allocate an input selector to the DIGITAL IN
COAXIAL 2 jack. (Default Value is "CBL/SAT")
OPT1 "BD/DVD", "CBL/SAT", "GAME", "PC", "CD", "TV/TAPE",
"PHONO": Allocate an input selector to the DIGITAL IN
OPTICAL 1 jack. (Default Value is "GAME")
OPT2 "BD/DVD", "CBL/SAT", "GAME", "PC", "CD", "TV/TAPE",
"PHONO": Allocate an input selector to the DIGITAL IN
OPTICAL 2 jack. (Default Value is "TV/TAPE")
Max Vol Set the maximum value to avoid too high volume. Select "Off
(default value)" or a value between "50" to "99".
POn Vol Set the volume level of when the power is turned on. Select
"Last (default value)" (volume level before entering standby
mode), "Min", "0.5" to "99.5" and "Max".
0 You cannot set a higher value than that of "Max Vol".
HP Lvl Adjust the output level of the headphones. Select from
"-12.0 dB" to "+12.0 dB". (Default Value is "0.0 dB")
SpImpedance Set the impedance (≠) of the connected speakers.
"4 ": When any of the connected speakers have 4 ≠ or more to
less than 6 ≠ impedance, or when speaker systems are
connected to both of the SPEAKERS A/B terminals
"6 (default value)": When the connected speakers all have 6 ≠
or more impedance
0 Note that when connecting to both SPEAKERS A and B
terminals, connect speakers with 8 ≠ to 16 ≠ impedance to
both A and B.
0 For impedance, check the indications on the back of the
speakers or their instruction manual.
Auto Stby This setting places the unit on standby automatically after 20
minutes of inactivity without any audio input. (When "NET Stby"
is on, this becomes the Hybrid Standby mode which reduces the
increase in power consumption to a minimum.)
"On": The unit will automatically enter standby mode. "AUTO
STBY" lights on the display.
"Off": The unit will not automatically enter standby mode.
0 "Auto Stby" is displayed on the display 30 seconds before the
Auto Standby comes on.
0 "Auto Stby" does not work when ZONE 2 is active.
0 Default values vary depending on the regions.
NET Stby When this feature is turned "On (default value)", you can turn on
the power of the unit via the network using an application that
can control this unit.
0 When using "NET Stby", power consumption increases even
when this unit is on standby, however, the increase in power
consumption is kept to a minimum by automatically entering
the Hybrid Standby mode, where only essential circuits are
operating.
0 When the connection to the network is lost, "NET Stby" is
disabled to reduce power consumption. Use the power button
on the remote controller or main unit to turn the unit on if this
happens.
SN29403237B_DTM-6_En_1802XX.book 33 ページ ２０１８年２月２８日 水曜日 午後４時５４分
34
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
4. Source
5. Zone2
6. Network
0 When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting
automatically. Further, to assign fixed IP addresses to each component, you must set
"DHCP" to "Disable" and assign an address to this unit in "IP Address" as well as set
BT Wakeup This function wakes up the unit on standby by connecting a
BLUETOOTH wireless technology enabled device.
"On": When this function is to be used
"Off (default value)": When this function is not to be used
0 When this setting is turned "On", power consumption
increases even when this unit is on standby, however, the
increase in power consumption is kept to a minimum by
automatically entering the Hybrid Standby mode, where only
essential circuits are operating.
0 The setting is fixed to "Off" if "7. Bluetooth" - "AutoChange" is
set to "Off".
Opt1Wkup When an audio signal is input through the OPTICAL 1 terminal
while this unit is in standby, this feature automatically detects it.
"Main": This unit is turned on and outputs the audio in the main room.
"Zone2": ZONE 2 is turned on and outputs the audio in the
separate room.
"Both": This unit is turned on, ZONE 2 is turned on, and audio is
output in both the main room and in the separate room.
"Off (default value)": The function is disabled.
0 When a cable is connected to the OPTICAL 1 terminal and
this setting is enabled, power consumption increases even
when the unit is on standby, however, the increase in power
consumption is kept to a minimum by automatically entering
the HYBRID STANDBY mode, where only essential circuits
are operating.
0 "The Opt1Wkup feature does not work when the unit is in the
mode for controlling ZONE 2 (P28).
AM/FM
(North American
Models)
Select a frequency step depending on your area of residence.
Select "9k/0.05M" or "10k/0.2M (default value)".
0 When this setting is changed, all radio presets are deleted.
AM Freq
(European Models)
Select a frequency step depending on your area of residence.
Select "9 kHz (default value)" or "10 kHz".
0 When this setting is changed, all radio presets are deleted.
Intelli Adjust the volume level difference between the devices
connected to the unit. Select the input selector to configure.
Select from "-12.0 dB" to "+12.0 dB". Set a negative (j) value if
the volume of the target device is larger than the others and a
positive (i) value if smaller. To check the audio, start playback of
the connected device. (Default Value is "0.0 dB")
0 This function is not effective in ZONE 2.
Name Edit Set an easy name to each input. The set name will be shown on
the main unit display. Select the input selector to configure.
For details on how to enter text, refer to "Entering text" (P16).
0 To name a preset radio station, press Tuner on the remote
controller, select AM/FM and select the preset number.
0 It cannot be set if the "NET" or "BLUETOOTH" input is
selected.
Z2Out If the amplifier you connected for the multi-room feature doesn't
enable you to adjust the volume, you can adjust the volume,
balance, bass, and treble for ZONE 2 on this unit.
"Fixed": (default value): Adjust the volume and sound quality on
the amplifier for ZONE 2.
"Variable": You can adjust the volume and sound quality on this unit.
Z2MaxVol Set the maximum volume for the volume control of ZONE 2.
Select "Off (default value)" or a value between "50" to "99".
0 You can set this only when
"
Z2Out
"
is set to
"
Variable
"
.
Z2POnVl Set the volume for when the unit of ZONE 2 is turned on. Select
"Last (default value)" (volume level before entering standby
mode), "Min", "0.5" to "99.5" and "Max".
0 You can set this only when
"
Z2Out
"
is set to
"
Variable
"
.
SN29403237B_DTM-6_En_1802XX.book 34 ページ ２０１８年２月２８日 水曜日 午後４時５４分
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
35
En
information related to your LAN, such as Subnet Mask and Gateway.
0 Wait for a while if "Network" cannot be selected. It will appear when the network feature is
started.
7. Bluetooth
Wi-Fi Connect the unit to network via wireless LAN router.
"On": Wireless LAN connection
"Off (default value)": To connect via wired LAN
Wi-Fi Setup You can configure wireless LAN settings by pressing Enter when
"Start" is displayed.
0 This is displayed only when "On" is selected in "Wi-Fi".
0 Refer to Initial Setup (P14) for Wi-Fi settings.
SSID The SSID of the connected access point
Signal The signal strength of the connected access point
Stat The status of the connected access point
MAC Address This is the MAC address of this unit.
This value is specific to the component and cannot be changed.
DHCP "Enable (default value)": Auto configuration by DHCP
"Disable": Manual configuration without DHCP
If "Disable" is selected, you must set "IP Address", "Subnet
Mask", "Gateway", and "DNS Server" manually.
IP Address Displays/Sets the IP address.
Subnet Mask Displays/Sets the subnet mask.
Gateway Displays/Sets the gateway.
DNS Server Displays/Sets the primary DNS server.
Proxy URL Displays/Sets the proxy server URL.
Proxy Port Displays/Sets the proxy server port number when you enter
"Proxy URL".
Friendly Name Change the device name for this unit which is shown on other
devices connected to the network to an easily recognized name.
This is set to Integra DTM-6 at the time of
purchase. ( stand for alphanumeric characters identifying each
unit)
For details on how to enter text, refer to "Entering text" (P16).
AirPlay PW You can set a password of up to 31 characters so that only
registered users can use AirPlay.
For details on how to enter text, refer to "Entering text" (P16).
Network Check You can check the network connection.
Press Enter when "Start" is displayed.
Bluetooth Select whether or not to use the BLUETOOTH function.
"On (default value)": Enables connection with a BLUETOOTH
wireless technology enabled device by using the BLUETOOTH
function. Select "On" also when making various BLUETOOTH
settings.
"Off": When the BLUETOOTH function is not to be used
AutoChange The input of the unit will automatically be switched to
"BLUETOOTH" when connection is made from a BLUETOOTH
wireless technology enabled device to the unit.
"On (default value)": The input will automatically become
"BLUETOOTH" when a BLUETOOTH wireless technology
enabled device is connected.
"Off": The function is disabled.
0 If the input is not switched automatically, set to "Off" and
change the input manually.
Reconnect This function automatically reconnects to the BLUETOOTH
wireless technology enabled device connected last when you
change the input to "BLUETOOTH".
"On (default value)": When this function is to be used
"Off": When this function is not to be used
0 This may not work with some BLUETOOTH wireless
technology enabled devices.
SN29403237B_DTM-6_En_1802XX.book 35 ページ ２０１８年２月２８日 水曜日 午後４時５４分
36
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
0 Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH
function is started up.
8. F/W Update
0 Wait for a while if "Firmware Update" cannot be selected. It will appear when the network
feature is started.
9. Lock
10. 12V TRG A
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V TRIGGER
OUT A jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
Pairing Info You can initialize the pairing information saved on this unit.
Pressing Enter when "Clear" is displayed initializes the pairing
information stored in this unit.
0 This function does not initialize the pairing information on the
BLUETOOTH wireless technology enabled device. When
pairing the unit again with the device, be sure to clear the
pairing information on the BLUETOOTH wireless technology
enabled device in advance. For information on how to clear
the pairing information, refer to the BLUETOOTH wireless
technology enabled device's instruction manual.
Device Displays the name of the BLUETOOTH wireless technology
enabled device connected to the unit.
0 The name is not displayed when "Stat" is "Ready" or "Pairing".
Stat Displays the status of the BLUETOOTH wireless technology
enabled device connected to the unit.
"Ready": Not paired
"Pairing": Pairing
"Connected": Successfully connected
Notice Availability of a firmware update will be notified via network.
"Enable (default value)": Notify updates
"Disable": Disable notifications
Ver The current firmware version will be displayed.
Update via NET
Press Enter to select when you want to update the firmware via network.
0 You will not be able to select this setting if you do not have
Internet access or there is nothing to update.
Update via USB Press Enter to select when you want to update the firmware via
USB.
0 You will not be able to select this setting if a USB storage
device is not connected or there is nothing to update in the
USB storage device.
Setup Lock the Setup menu to protect the settings.
"Locked": The menu is locked.
"Unlocked (default value)": Unlocked
Delay Set after how many seconds the 12V trigger output will occur in
response to the unit's operation. As some devices cause a large
current when they turn on, delay the output if such devices are
connected. Select a value between "0sec (default value)" to
"3sec".
BD/DVD Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "BD/DVD" is selected as
input for main room.
"Zone2": Output when "BD/DVD" is selected as input for ZONE 2.
"M/Z2": Output when "BD/DVD" is selected as input for main
room or ZONE 2.
CBL/SAT Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "CBL/SAT" is selected as
input for main room.
"Zone2": Output when "CBL/SAT" is selected as input for ZONE 2.
"M/Z2": Output when "CBL/SAT" is selected as input for main
room or ZONE 2.
SN29403237B_DTM-6_En_1802XX.book 36 ページ ２０１８年２月２８日 水曜日 午後４時５４分
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
37
En
11. 12V TRG B
Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER
OUT B jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
GAME Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "GAME" is selected as input
for main room.
"
Zone2
": Output when "GAME" is selected as input for ZONE 2.
"M/Z2": Output when "GAME" is selected as input for main room
or ZONE 2.
PC Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "PC" is selected as input for
main room.
"
Zone2
": Output when "PC" is selected as input for ZONE 2.
"M/Z2": Output when "PC" is selected as input for main room or
ZONE 2.
CD Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "CD" is selected as input for
main room.
"
Zone2
": Output when "CD" is selected as input for ZONE 2.
"M/Z2": Output when "CD" is selected as input for main room or
ZONE 2.
TV/TAPE Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "TV/TAPE" is selected as
input for main room.
"Zone2": Output when "TV/TAPE" is selected as input for ZONE 2.
"M/Z2": Output when "TV/TAPE" is selected as input for main
room or ZONE 2.
PHONO Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "PHONO" is selected as
input for main room.
"Zone2": Output when "PHONO" is selected as input for ZONE 2.
"M/Z2": Output when "PHONO" is selected as input for main
room or ZONE 2.
TUNER Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "TUNER" is selected as
input for main room.
"Zone2": Output when "TUNER" is selected as input for ZONE 2.
"M/Z2": Output when "TUNER" is selected as input for main
room or ZONE 2.
NET Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "NET" is selected as input
for main room.
"
Zone2
": Output when "NET" is selected as input for ZONE 2.
"M/Z2": Output when "NET" is selected as input for main room or
ZONE 2.
BLUETOOTH Set the 12V trigger output setting to each input.
"Off": No output
"Main (default value)": Output when "BLUETOOTH" is selected
as input for main room.
"Z2": Output when "BLUETOOTH" is selected as input for ZONE
2.
"M/Z2": Output when "BLUETOOTH" is selected as input for
main room or ZONE 2.
Delay Set after how many seconds the 12V trigger output will occur in
response to the unit's operation. As some devices cause a large
current when they turn on, delay the output if such devices are
connected.
Select a value between "0sec" to "3sec". (Default Value is "1sec")
SN29403237B_DTM-6_En_1802XX.book 37 ページ ２０１８年２月２８日 水曜日 午後４時５４分
38
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
BD/DVD Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as input for main room.
"
Zone2
(default value)": Output when "BD/DVD" is selected as
input for ZONE 2.
"M/Z2": Output when "BD/DVD" is selected as input for main
room or ZONE 2.
CBL/SAT Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as input for main room.
"
Zone2
(default value)": Output when "CBL/SAT" is selected as
input for ZONE 2.
"M/Z2": Output when "CBL/SAT" is selected as input for main
room or ZONE 2.
GAME Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input for main room.
"
Zone2
(default value)": Output when "GAME" is selected as
input for ZONE 2.
"M/Z2": Output when "GAME" is selected as input for main room
or ZONE 2.
PC Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PC" is selected as input for main room.
"
Zone2
(default value)": Output when "PC" is selected as input
for ZONE 2.
"M/Z2": Output when "PC" is selected as input for main room or
ZONE 2.
CD Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CD" is selected as input for main room.
"
Zone2
(default value)": Output when "CD" is selected as input
for ZONE 2.
"M/Z2": Output when "CD" is selected as input for main room or
ZONE 2.
TV/TAPE Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TV/TAPE" is selected as input for main room.
"
Zone2
(default value)": Output when "TV/TAPE" is selected as
input for ZONE 2.
"M/Z2": Output when "TV/TAPE" is selected as input for main
room or ZONE 2.
PHONO Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input for main room.
"
Zone2
(default value)": Output when "PHONO" is selected as
input for ZONE 2.
"M/Z2": Output when "PHONO" is selected as input for main
room or ZONE 2.
TUNER Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input for main room.
"
Zone2
(default value)": Output when "TUNER" is selected as
input for ZONE 2.
"M/Z2": Output when "TUNER" is selected as input for main
room or ZONE 2.
NET Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "NET" is selected as input for main room.
"
Zone2
(default value)": Output when "NET" is selected as input
for ZONE 2.
"M/Z2": Output when "NET" is selected as input for main room or ZONE 2.
BLUETOOTH Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BLUETOOTH" is selected as input for
main room.
"Z2 (default value)": Output when "BLUETOOTH" is selected as
input for ZONE 2.
"M/Z2": Output when "BLUETOOTH" is selected as input for
main room or ZONE 2.
SN29403237B_DTM-6_En_1802XX.book 38 ページ ２０１８年２月２８日 水曜日 午後４時５４分
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
39
En
12. 12V TRG C
Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER
OUT C jack. Different settings can be set for each input selector. You can enable power link
operation when you connect the unit and the external devices equipped with 12V trigger
input jack.
Delay Set after how many seconds the 12V trigger output will occur in
response to the unit's operation. As some devices cause a large
current when they turn on, delay the output if such devices are
connected.
Select a value between "0sec" to "3sec". (Default Value is "2sec")
BD/DVD Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as input for main room.
"Zone2": Output when "BD/DVD" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "BD/DVD" is selected as
input for main room or ZONE 2.
CBL/SAT Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as input for main room.
"Zone2": Output when "CBL/SAT" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "CBL/SAT" is selected as
input for main room or ZONE 2.
GAME Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input for main room.
"
Zone2
": Output when "GAME" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "GAME" is selected as input
for main room or ZONE 2.
PC Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PC" is selected as input for main room.
"
Zone2
": Output when "PC" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "PC" is selected as input for
main room or ZONE 2.
CD Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CD" is selected as input for main room.
"
Zone2
": Output when "CD" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "CD" is selected as input for
main room or ZONE 2.
TV/TAPE Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TV/TAPE" is selected as input for main room.
"Zone2": Output when "TV/TAPE" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "TV/TAPE" is selected as
input for main room or ZONE 2.
PHONO Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input for main room.
"Zone2": Output when "PHONO" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "PHONO" is selected as
input for main room or ZONE 2.
TUNER Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input for main room.
"Zone2": Output when "TUNER" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "TUNER" is selected as
input for main room or ZONE 2.
NET Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "NET" is selected as input for main room.
"
Zone2
": Output when "NET" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "NET" is selected as input
for main room or ZONE 2.
BLUETOOTH Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BLUETOOTH" is selected as input for
main room.
"Z2": Output when "BLUETOOTH" is selected as input for ZONE 2.
"M/Z2 (default value)": Output when "BLUETOOTH" is selected
as input for main room or ZONE 2.
SN29403237B_DTM-6_En_1802XX.book 39 ページ ２０１８年２月２８日 水曜日 午後４時５４分
40
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
Web Setup
You can make the settings for network
features for this unit in an internet browser
on a PC, smartphone, etc.
1. Press Setup on the remote controller to
display the Setup menu.
2. Select "6. Network" - "IP Address" with
the cursors and take a note of the IP
address displayed.
3. Start the internet browser on your PC or
smartphone and enter the IP address of
the unit in the URL field.
4. Information for the unit (Web Setup
screen) is displayed in the internet
browser.
5. After changing the settings, select
"Save" to save the settings.
Device Information
You can change the Friendly Name, set an
AirPlay PW, etc.
Control4: Register this unit if you are using
a Control4 system.
Firmware Update: Select the firmware
update you have downloaded to your PC
so you can update this unit.
Network Setting
Stat: You can see information for the
network such as the MAC address and IP
address for this unit.
Network Connection: You can select how to
connect to the network. If you select
"Wireless", select an access point from
"Wi-Fi Setup" to connect.
DHCP: You can change DHCP settings. If
you select "Off", set "IP Address", "Subnet
Mask", "Gateway", and "DNS Server"
manually.
Proxy: Display and set the URL for the
proxy server.
SN29403237B_DTM-6_En_1802XX.book 40 ページ ２０１８年２月２８日 水曜日 午後４時５４分
41
En
Firmware Update
The updating function on this unit
This unit has functionality to update the firmware (the
system software) over a network or by the USB port. This
enables us to make improvements to a variety of operations
and to add features.
How to update
There are two methods for updating the firmware: via
network and via USB. The update may take about 20
minutes to complete for either method: via network or via
USB. Furthermore, settings you have changed are
maintained regardless of the method used for update.
Note that when this unit is connected to a network, you may
see notifications about firmware updates on the display. To
execute updating, select "Update Now" with the cursors of
the remote controller and press Enter. "Completed!" is
displayed when the update is complete.
0 For the latest information on updates, visit our website.
There is no need to update the firmware on this unit if
there is no update available.
0 During an update, do not:
– Disconnect and reconnect any cable or USB storage
device, headphones, or perform any operation on the
component such as turn off its power
– Accessing this unit from a PC or smartphone using an
application
Disclaimer: The program and accompanying online
documentation are furnished to you for use at your own
risk.
We will not be liable and you will have no remedy for
damages for any claim of any kind whatsoever concerning
your use of the program or the accompanying online
documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will we be liable to you or any third party for any
special, indirect, incidental, or consequential damages of
any kind, including, but not limited to, compensation,
reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other
reason whatsoever.
Updating the Firmware via Network
0 Check that the unit is turned on, and the connection to
the Internet is secured.
0 Turn off the controller component (PC etc.) connected to
the network.
0 Stop any playing Internet radio, USB storage device, or
server content.
0 If the multi-zone function is active, turn it off.
1. Press Setup on the remote controller.
2. Select "8. F/W Update" - "Update via NET" in order with
the Up/Down buttons on the remote controller and press
Enter.
0 You will not be able to select "Update via NET" if there
is no firmware update.
3. Press Enter with "Update" displayed to start the update.
0 "Completed!" is displayed when the update is
complete.
4. Press Í On/Standby on the main unit to switch the unit
to standby. The process is completed and your firmware
is updated to the latest version.
0 Do not use Í on the remote controller.
If an Error Message is Displayed: When an error occurs,
" - Error!" is displayed on the display of the unit. (" "
represents an alphanumeric character.) Check the
following:
0 -01, -10: Cannot recognize Ethernet cable. Connect
the Ethernet cable properly.
0 -02, -03, -04, -05, -06, -11, -13, -14,
-16, -17, -18, -20, -21: Internet connection error.
Check the following:
– Whether the router is turned on
– Whether this unit and router are connected to the
network
Try to disconnect and then connect again the power to
the unit and router. This may solve the problem. If you
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
Update via NET
SN29403237B_DTM-6_En_1802XX.book 41 ページ ２０１８年２月２８日 水曜日 午後４時５４分
42
are still unable to connect to the Internet, the DNS server
or proxy server may be temporarily down. Check the
service status with your ISP provider.
0 Others: Disconnect then reconnect the power cord, then
repeat from the beginning.
Updating via USB
0 Prepare a 128 MB or larger USB storage device. FAT16
or FAT32 file system format.
– Media inserted in a USB card reader may not be used
for this function.
– USB storage devices with security function are not
supported.
– USB hubs and USB devices with hub function are not
supported. Do not connect these devices to the unit.
0 Delete any data stored on the USB storage device.
0 Turn off the controller component (PC etc.) connected to
the network.
0 Stop any playing Internet radio, USB storage device, or
server content.
0 If the multi-zone function is active, turn it off.
0 Some USB storage devices may take long to load, may
not be loaded correctly, or may not be correctly fed
depending on the device or their content.
0 We will not be liable whatsoever for any loss or damage
of data, or storage failure arising from the use of the USB
storage device with this unit. Thank you for your
understanding.
1. Connect the USB storage device to your PC.
2. Download the firmware file from the our website to your
PC and unzip.
Firmware files are named in the following way:
ONKRCV _ .zip
Unzip the file on your PC. The number of unzipped files
and folders varies depending on the model.
3. Copy all unzipped files and folders to the root folder of
the USB storage device.
0 Make sure to copy the unzipped files.
4. Connect the USB storage device to the USB port on the
main unit.
0 If you connect a USB hard disk drive to the USB port
of the unit, we recommend that you use its AC adapter
to power it.
0 If the USB storage device has been partitioned, each
section will be treated as an independent device.
5. Press Setup on the remote controller.
6. Select "8. F/W Update" - "Update via USB" in order with
the Up/Down buttons on the remote controller and press
Enter.
0 You will not be able to select "Update via USB" if there
is no firmware update.
7. Press Enter with "Update" displayed to start the update.
0 During the update, do not turn off, or disconnect then
reconnect the USB storage device.
0 "Completed!" is displayed when the update is
complete.
8. Disconnect the USB storage device from the main unit.
9. Press Í On/Standby on the main unit to switch the unit
to standby. The process is completed and your firmware
is updated to the latest version.
0 Do not use Í on the remote controller.
If an Error Message is Displayed: When an error occurs,
" - Error!" is displayed on the display of the unit. (" "
represents an alphanumeric character.) Check the
following:
0 -01, -10: USB storage device not found. Check
whether the USB storage device or USB cable is
correctly inserted to the USB port of this unit.
Connect the USB storage device to an external power
source if it has its own power supply.
0 -05, -13, -20, -21:
The firmware file is not
present in the root folder of the USB storage device, or
the firmware file is for another model. Retry from the
download of the firmware file.
0 Others: Disconnect then reconnect the power cord, then
repeat from the beginning.
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup |Others
Update via USB
SN29403237B_DTM-6_En_1802XX.book 42 ページ ２０１８年２月２８日 水曜日 午後４時５４分
43
En
Others
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/off
or disconnecting/connecting the power cord, which is easier
than working on the connection, setting and operating
procedure. Try the simple measures on both the unit and
the connected device. If the problem isn't fixed after
referring to "Troubleshooting", resetting the unit to the
status at the time of shipment may solve the problem. Note
that your settings will also be initialized when you reset, so
we recommend that you note down your settings before
doing the following.
0 This unit contains a microPC for signal processing and
control functions. In very rare situations, severe
interference, noise from an external source, or static
electricity may cause it to lockup. In the unlikely event
that this happens, unplug the power cord from the wall
outlet, wait at least 5 seconds, and then plug it back in.
0 We are not responsible for reparations for damages
(such as CD rental fees) due to unsuccessful recordings
caused by the unit’s malfunction. Before you record
important data, make sure that the material will be
recorded correctly.
If operation becomes unstable
Try restarting the unit
The issue may be fixed by restarting this unit. After
switching this unit to standby, press and hold Í On/
Standby on this unit for 5 or more seconds to restart the
unit.
(The settings in the unit are maintained.) If the issue is not
fixed by restarting, try unplugging the power cords of the
unit and connected devices, and then plugging them in
again.
Resetting the unit (this resets the unit settings to the
default)
If restarting the unit doesn't fix the problem, resetting the
unit to the status at the time of shipment may solve the
problem. Your settings will also be initialized when you
reset, so note down your settings before doing the
following.
1. While holding down Tuning Mode on the main unit, press
Í On/Standby.
2. The unit switches to standby and the settings are reset.
∫ Power
Cannot turn on the unit
0 Make sure that the power cord is properly plugged into
the wall outlet.
0 Unplug the power cord from the wall outlet, wait 5
seconds or more, then plug it in again.
The unit turns off unexpectedly
0 The unit automatically switches to standby when the "3.
Hardware" - "Auto Stby" setting in the Setup menu
functions.
0 The protective circuit function may have been activated.
If "CHECK SP WIRE" appears on the display, the
speaker cables may be short-circuited. Make sure bare
speaker wires are not touching each other or the back
panel of the unit, then turn the unit on again. If "NG" is
displayed, immediately unplug the power cord from the
wall outlet and contact your dealer.
0 The protective circuit function may have been activated
because the temperature of the unit rose abnormally. If
this happens, then the power will continue to turn off after
you have turned the unit on again. Make sure the unit
has plenty of space for ventilation around it, wait for the
unit to cool down sufficiently, and then try turning it on
again.
WARNING: If smoke, smell or abnormal noise is produced
by the unit, unplug the power cord from the wall outlet
immediately and contact the dealer or customer support.
∫ Audio
0 Confirm that the connection between the output jack on
the device and the input jack on this unit is correct.
0 Make sure that none of the connecting cables are bent,
twisted, or damaged.
0 If the MUTE indicator on the display flashes, press
Muting on the remote controller to cancel muting.
0 While headphones are connected to the Phones jack, no
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237B_DTM-6_En_1802XX.book 43 ページ ２０１８年２月２８日 水曜日 午後４時５４分
44
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
sound is output from the speakers.
No sound from a connected external device
0 Change the input selector on this unit to the position of
the terminal to which the external device is connected.
0 Check the digital audio output setting on the connected
component. On some game consoles, such as those that
support DVD, the default setting is off.
0 Only PCM audio is supported for input through the
DIGITAL IN OPTICAL/COAXIAL jacks. Set the audio
output on the external device to output PCM.
A speaker produces no sound
0 Make sure that the polarity of the speaker cables (+/-) is
correct, and that no bare wires are in contact with the
metal part of speaker terminals.
0 Make sure that the speaker cables have not shorted.
0 Make sure the speakers are connected correctly (P9).
Noise can be heard
0 Using cable ties to bundle analog audio cables, power
cords, speaker cables, etc. may degrade the audio
performance, Do not bundle cords.
0 An audio cable may be picking up interference. Try
repositioning your cables.
Sound suddenly reduces
0 When the temperature inside the unit exceeds a certain
temperature for extended periods, the volume may be
reduced automatically to protect the circuits.
∫ AM/FM broadcasting
Radio reception is poor or there is a lot of noise
0 Re-check the antenna connection.
0 Separate the antenna from speaker cables and the
power cord.
0 Move the unit away from your TV or PC.
0 Passing cars and airplanes can cause interference.
0 Concrete walls weaken radio signals.
0 Listen to the station in mono.
0 When listening to an AM station, operating the remote
controller may cause noise.
0 FM reception may become clearer if you use the antenna
jack on the wall used for the TV.
∫ The BLUETOOTH feature
0 Try plugging/unplugging the power of the unit and try
turning on/off the BLUETOOTH wireless technology
enabled device. Restarting the BLUETOOTH wireless
technology enabled device may be effective.
0 The BLUETOOTH wireless technology enabled devices
must support the A2DP profile.
0 Radio wave interference may occur in the vicinity of
components, such as microwave ovens or cordless
phones, which use radio waves in the 2.4 GHz range.
This interference may render this unit unusable.
0 If there is a metallic object near the unit, BLUETOOTH
connection may not be possible as the metal can effect
on the radio waves.
Cannot connect with this unit
0 Check that the BLUETOOTH function of the
BLUETOOTH wireless technology enabled device is
enabled.
Music playback is unavailable on the unit even after
successful BLUETOOTH connection
0 When the audio volume of your BLUETOOTH wireless
technology enabled device is set low, the playback of
audio may be unavailable. Turn up the volume on the
BLUETOOTH wireless technology enabled device.
0 Some BLUETOOTH wireless technology enabled
devices may be equipped with a Send/Receive selector
switch. Select Send mode.
0 Depending on the characteristics or specifications of
your BLUETOOTH wireless technology enabled device,
playback on this unit may not be possible.
Sound is interrupted
0 There may be a problem with the BLUETOOTH wireless
technology enabled device. Check the information on the
internet.
The audio quality is poor after connection with a
BLUETOOTH wireless technology enabled device
0 Reception is poor. Move the BLUETOOTH wireless
technology enabled device closer to the unit or remove
any obstacle between the BLUETOOTH wireless
technology enabled device and this unit.
∫ Network Functions
0 If you cannot select a network service, it will become
selectable when the network function is started. It may
take about a minute to start up.
0 When NET is blinking, this unit is not properly connected
to the home network.
0 Try plugging/unplugging the power supply of this unit and
the router, and try rebooting the router.
0 If the desired wireless LAN router is not in the access
point list, it may be set to hide SSID or the ANY
connection may be off. Change the setting and try again.
Cannot access the Internet radio
0 Certain network service or contents available through the
unit may not be accessible in case the service provider
terminates its service.
0 Make sure that your modem and router are properly
connected, and make sure they are both turned on.
0 Make sure that the LAN side port on the router is
properly connected to this unit.
0 Make sure that connecting to Internet from other
components is possible. If connecting is not possible,
turn off all components connected to the network, wait for
a while, and then turn on the components again.
0 If a specific radio station is unavailable for listening,
make sure the registered URL is correct, or whether the
format distributed from the radio station is supported by
SN29403237B_DTM-6_En_1802XX.book 44 ページ ２０１８年２月２８日 水曜日 午後４時５４分
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
45
En
this unit.
0 Depending on ISP, setting the proxy server is necessary.
0 Make sure that the router and/or modem you are using is
supported by your ISP.
Cannot access the network server
0 This unit needs to be connected to the same router as
the network server.
0 This unit is compatible with Windows Media
®
Player 11
or 12 network servers or NAS that are compatible with
home network functionality.
0 You may need to make some settings on Windows
Media
®
Player (P26).
0 When using a PC, only music files registered in the
Windows Media
®
Player library can be played.
Playback stops while listening to music files on the
network server
0 Make sure the network server is compatible with this unit.
0 When the PC is serving as the network server, try
quitting any application software other than the server
software (Windows Media
®
Player 12 etc.).
0 If the PC is downloading or copying large files, the
playback may be interrupted.
∫ USB storage device
USB storage device is not displayed
0 Check whether the USB storage device or USB cable is
correctly inserted to the USB port of the unit.
0 Disconnect the USB storage device from the unit, and
then try reconnecting.
0 Performance of hard disks that receive power from the
USB port of the unit is not guaranteed.
0 Depending on the type of format, the playback may not
be performed normally. Check the type of the file formats
that is supported.
0 USB storage devices with security functions may not be
played.
∫ Wireless LAN Network
0 Try plugging/unplugging the power supply of wireless
LAN router and the unit, check the wireless LAN router
power-on status, and try reboot of the wireless LAN
router.
Cannot access wireless LAN network
0 The wireless LAN router setting may be switched to
Manual. Return the setting to Auto.
0 Try the manual set-up. The connection may succeed.
0 When the wireless LAN router setting is at stealth mode
(mode to hide the SSID key) or when ANY connection is
off, the SSID is not displayed. Change the setting and try
again.
0 Check that the setting of SSID and encryption (WEP,
etc.) is correct. Make sure the network settings of the unit
is properly set.
0 Connection to an SSID that includes multi-byte
characters is not supported. Name the SSID of the
wireless LAN router using single-byte alphanumeric
characters only and try again.
Connected to an SSID different to the SSID selected
0 Some wireless LAN routers allow you to set multiple
SSIDs for one unit. If you use the automatic setting
button on such a router, you may end up connecting with
a different SSID from the SSID you wanted to connect to.
Use the connection method requiring you to enter a
password if this happens.
Playback is interrupted and communication does not
work
0 You may not receive radio waves due to bad radio wave
conditions. Shorten the distance from the wireless LAN
router or remove obstacles to improve visibility, and try
again. Place the unit away from microwave ovens or
other access points. It is recommended to place the
wireless LAN router and the unit in the same room.
0 If there is a metallic object near the unit, wireless LAN
connection may not be possible as the metal can effect
on the radio wave.
0 When other wireless LAN devices are used near the unit,
several issues such as interrupted playback and
communication may occur. You can avoid these issues
by changing the channel of your wireless LAN router. For
instructions on changing channels, see the instruction
manual provided with your wireless LAN router.
0 There may not be enough bandwidth available in the
band for wireless LAN. Connect using an Ethernet cable.
∫ Remote Controller
0 Make sure that the batteries are installed with the correct
polarity.
0 Install new batteries. Do not mix different types of
batteries, or old and new batteries.
0 Make sure that the unit is not subjected to direct
sunshine or inverter-type fluorescent lights. Relocate if
necessary.
0 If the unit is installed in a rack or cabinet with colored-
glass doors or if the doors are closed, the remote
controller may not work reliably.
0 After operating the Multi-zone function, the remote
controller may have switched to the mode for controlling
ZONE 2. Press Remote Mode Main to switch to the
mode to control the main room.
∫ Display
The display doesn't light
0 The display may go dim while the Dimmer is working.
Press Dimmer to change the brightness level of the
display.
SN29403237B_DTM-6_En_1802XX.book 45 ページ ２０１８年２月２８日 水曜日 午後４時５４分
46
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
∫ Others
Strange noises can be heard from the unit
0 If you have connected another unit to the same wall
outlet as this unit, this noise may be an effect from the
other unit. If the symptoms improve by unplugging the
power cord of the other unit, use different wall outlets for
this unit and the other unit.
SN29403237B_DTM-6_En_1802XX.book 46 ページ ２０１８年２月２８日 水曜日 午後４時５４分
47
En
General Specifications
Amplifier (Audio) section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20 -
20,000 Hz; rated 70 watts per channel minimum RMS
power, with no more than 0.08% total harmonic distortion
from 250 milliwatts to rated output.
Rated Output Power (IEC) (European)
2 ch k 135 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD
Maximum Effective Output Power (JEITA) (North American)
2 ch k 160 W at 6 ohms, 1 kHz, 2 ch driven of 10% THD
Dynamic Power (*)
(*)IEC60268-Short-term maximum output power
180 W (3 ≠, Front)
160 W (4 ≠, Front)
100 W (8 ≠, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance (1 kHz,100 W/8 ≠)
200 mV/50 k≠ (LINE (Unbalance))
2.5 mV/50 k≠ (PHONO MM)
Rated RCA Output Level and Impedance
150 mV/470 ≠ (PRE OUT)
470 mV/680 ≠ (SUBWOOFER PRE OUT)
200 mV/2.2 k≠ (ZONE OUT)
150 mV/2.2 k≠ (ZONE PRE OUT)
Phono Overload
70 mV (MM 1 kHz, 0.5%)
Frequency Response
10 Hz - 100 kHz/i1 dB, j3 dB (Direct)
Tone Control Characteristics
n10 dB, 100 Hz (BASS)
n10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 ≠ - 16 ≠
Headphone Output Impedance
390 ≠
Headphone Rated Output
200 mW (32 ≠, 1 kHz, 10% THD)
Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (European)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (European)
Preset Channel
40
Network Section
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi
®
standard)
2.4 GHz/5 GHz band
BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Frequency Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 48y/15 m (*)
(*)The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, cordless phone,
reception sensitivity, antenna’s performance, operating
system, software application, etc.
General
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 230 V, 50/60 Hz (European)
Power Consumption
230 W (North American)
220 W (European)
0.1 W (Stand-by)
70 W (No-sound, North American)
65 W (No-sound, European)
2.9 W (Hybrid Standby)
Dimensions (W k H k D)
435 mm k 149 mm k 329 mm
17-1/8z k 5-7/8z k 12-15/16z
Weight
8.5 kg / 18.7 lbs
Audio Inputs
Digital
OPTICAL 1 (GAME), 2 (TV/TAPE)
Maximum Fs: 192 kHz
COAXIAL 1 (BD/DVD), 2 (CBL/SAT)
Maximum Fs: 192 kHz
Analog
PHONO, CD, TV/TAPE, GAME, PC, CBL/SAT, BD/DVD
Audio Outputs
Analog
SUBWOOFER PRE OUT
PRE OUT L/R
LINE OUT L/R
ZONE2 PRE/LINE OUT L/R
ZONE2 SUBWOOFER PRE OUT
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
SN29403237B_DTM-6_En_1802XX.book 47 ページ ２０１８年２月２８日 水曜日 午後４時５４分
48
> Before Start > Part Names > Install > Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Speaker Outputs
SPEAKERS A: FRONT L/R
SPEAKERS B: FRONT L/R
(North American models are banana plug ready)
Phones
PHONES (Front, Ø1/4z/6.3 mm)
Others
USB: 2 (Front: Ver.2.0, 5 V/0.5 A, Rear: Ver.2.0, 5 V/1 A)
Ethernet: 1
RI REMOTE CONTROL: 1
RS232: 1
12V TRIGGER OUT: 3 (A: 100 mA, B: 25 mA, C: 25 mA)
IR IN: 2
IR OUT: 1
SN29403237B_DTM-6_En_1802XX.book 48 ページ ２０１８年２月２８日 水曜日 午後４時５４分
49
En
The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance
®
.
A
irPlay, iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.
Please note that the use of this accessory with iPod, iPhone or iPad may affect
wireless performance.
A
irPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac
with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later.
PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks
or registered trademarks of Pandora Media, Inc. Used with permission.
The Spotify software is subject to third party licenses found here:
https://developer.spotify.com/esdk-third-party-licenses/
Windows 7, Windows Media, and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other
countries.
DSD and the Direct Stream Digital logo are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners. / Toutes les
autres marques commerciales sont la propriété de leurs détenteurs respectifs. /
El resto de marcas comerciales son propiedad de sus respectivos propietarios.
/ Tutti gli altri marchi di fabbrica sono di proprietà dei rispettivi proprietari. / Alle
anderen Warenzeichen sind das Eigentum ihrer jeweiligen Eigentümer. / Alle
andere handelsmerken zijn eigendom van de desbetreffende rechthebbenden.
/ Alla andra varumärken tillhör deras respektive ägare. / Kaikki muut
tuotemerkit ovat omistajiensa omaisuutta. /
㎕㡞⋋⚛㭮䈏╙匿㎕㡞党㎕㡞
ѳ
"Made for iPod", "Made for iPhone" and "Made for iPad" mean that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or iPad,
respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
The BLUETOOTH
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
This product is protected by certain intellectual property rights of Microsoft. Use
or distribution of such technology outside of this product is prohibited without a
license from Microsoft.
SN29403237B_DTM-6_En_1802XX.book 49 ページ ２０１８年２月２８日 水曜日 午後４時５４分
50
SN29403237B_DTM-6_En_1802XX.book 50 ページ ２０１８年２月２８日 水曜日 午後４時５４分
51
En
SN29403237B_DTM-6_En_1802XX.book 51 ページ ２０１８年２月２８日 水曜日 午後４時５４分
*29403237B*
F1803-2
SN 29403237B
<U.S.A.>
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650
http://www.integrahometheater.com
<Germany>
Gutenbergstrasse 3, 82178 Puchheim, Germany
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213
http://www.integra.eu
<PRC>
302, Building 1, 20 North Chaling Rd., Xuhui District, Shanghai, China 200032,
Tel: +86-21-52131366 Fax: +86-21-52130396
http://www.integra.com.cn
1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 JAPAN
http://www.integraworldwide.com
(C) Copyright 2017 Onkyo & Pioneer Corporation Japan. All rights reserved.
http://www.onkyo.com/privacy/
SN29403237B_DTM-6_En_1802XX.book 52 ページ ２０１８年２月２８日 水曜日 午後４時５４分
